Sorry I haven't answered this more quickly. It's generated some internal discussion that is still ongoing. I think there is a doc somewhere that says you may have to increase the timeout, but that's also under discussion.
Todd Fujinaka Software Application Engineer Data Center Group Intel Corporation todd.fujin...@intel.com -----Original Message----- From: Harte, Sean <sean.ha...@analog.com> Sent: Wednesday, July 7, 2021 4:27 AM To: e1000-devel@lists.sourceforge.net Subject: [E1000-devel] timestamp timeout with E810 Hi, I am using linuxptp with an Intel E810-XXV Ethernet controller with ice driver version 1.5.8. Regular timeouts are occurring when retrieving the TX timestamp: ptp4l[4756.840]: timed out while polling for tx timestamp ptp4l[4756.840]: increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug ptp4l[4756.840]: port 1 (p2p1): send sync failed ptp4l[4756.840]: port 1 (p2p1): MASTER to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED) Increasing the linuxptp tx_timestamp_timeout setting to 50ms (from a default of 1ms) stops the timeouts. Is such a large delay expected with the E810/ice driver? I have previously being using an Intel XXV710 with i40e driver and never saw this error using the default timeout value of 1ms. Regards, Sean _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet
