Alexandre LISSY wrote:
Hi all again,
now, i've notice that the chipset indicated may change, sometimes it's
show Eagle0 and some others, it shows Eagle2 ? ...
strange isn't it ?
_______________________________________________
Eagleusb-dev mailing list
[email protected]
https://mail.gna.org/listinfo/eagleusb-dev
here is the bug (done on the same box, with the same modem):
linux:~/eagle-usb-2.0.0# eaglestat
eagle-usb status display
-------------------------------------------------------------
Driver version 2.0.0 Chipset: Eagle2
Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
USB Bus : 001 USB Device : 009 Dbg mask: 0x0
Ethernet Interface : eth1
MAC: 00:60:4c:4c:e2:03
Tx Rate 320 Rx Rate 1216
FEC 0 Margin 15 Atten 47 dB
VID-CPE 0 VID-CO 28 HEC 0
VPI 8 VCI 35 Delin GOOD
Cells Tx 0 Cells Rx 0
Pkts Tx 0 Pkts Rx 0
OAM 0 Bad VPI 0 Bad CRC 0
Oversiz. 0
and just before :
linux:/etc/eagle-usb# eaglestat
eagle-usb status display
-------------------------------------------------------------
Driver version 2.0.0 Chipset: Eagle0
Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
USB Bus : 001 USB Device : 002 Dbg mask: 0x0
Ethernet Interface : eth1
MAC: 00:60:4c:4c:e2:03
Tx Rate 320 Rx Rate 1216
FEC 345 Margin 15 Atten 49 dB
VID-CPE 0 VID-CO 28 HEC 1
VPI 8 VCI 35 Delin GOOD
Cells Tx 0 Cells Rx 0
Pkts Tx 0 Pkts Rx 0
OAM 0 Bad VPI 0 Bad CRC 0
Oversiz. 0
