Désolé pour le précedent message. je ne suis pas encore habitué à
cetains raccourcis claviers.

Fast 800 E2T - Fedora core 2 - kernel 2.6.8.1

J'ai testé la version cvs en changeant le eagle-usb.conf comme indiqué.
Premier truc bizarre : je me suis connecté normalement en faisant
startadsl, la connection fonctionne mais le voyant adsl continue de
clignoter comme si le modem était en train de synchroniser.

mon eaglediag -sc est en pj
Diagnostic (1.14 2004/09/23) driver eagle-usb 20040930235822
# System Information
Linux localhost.localdomain 2.6.8-1.521 #1 Mon Aug 16 09:01:18 EDT 2004 i686 
athlon i386 GNU/Linux
Fedora Core release 2 (Tettnang)
Linux version 2.6.8-1.521 ([EMAIL PROTECTED]) (gcc version 3.3.3 20040412 (Red 
Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004
version gcc 3.3.3 20040412 (Red Hat Linux 3.3.3-7)
# Dependances
le paquetage kernel-source n'est pas installé
ppp-2.4.2-3.FC2.1
le paquetage dhcp-client n'est pas installé
le paquetage dhcpcd n'est pas installé
# Kernel config : usb modules
eagle_usb             104716  0 
ppp_async               9153  1 
crc_ccitt               1985  1 ppp_async
ppp_generic            31061  5 ppp_async
slhc                    5825  1 ppp_generic
uhci_hcd               28505  0 
ohci_hcd               19793  0 
ehci_hcd               27973  0 
# module loaded ?        [ OK ]
# modem operational ?    [ OK ]
eagle-usb status display
-------------------------------------------------------------
Driver version 2
USB Bus : 002    USB Device : 009        Dbg mask: 0x0
Ethernet Interface : eth0
MAC: 00:60:4c:43:0b:6b
Tx Rate  0000000160  Rx Rate  0000000608  Crc      0000000000
FEC      0000000966  Margin   0000000012  Atten    0000000057 dB
VID-CPE  0000000000  VID-CO   0000000028  HEC      0000000013
VPI      0000000008  VCI      0000000035  Delin          GOOD
Cells Rx 0000006897  Cells Tx 0000003857
Pkts Rx  0000000543  Pkts Tx  0000000585
OAM      0000000000  Bad VPI  0000000000  Bad CRC  0000000000
Oversiz. 0000000000

Modem is operational

# Config vpi/vci/encapsulation/isp : 8 23 6 (pppoa) FR01
# pppd launched ?        [ OK ]
# Service for connection [ OK ]
# /etc/resolv.conf should contain the DNS
nameserver 217.19.192.131
nameserver 217.19.192.132
eth0      Lien encap:Ethernet  HWaddr 00:60:4C:43:0B:6B  
          UP BROADCAST RUNNING MULTICAST  MTU:65535  Metric:1
          RX packets:543 errors:0 dropped:0 overruns:0 frame:0
          TX packets:585 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          RX bytes:310310 (303.0 Kb)  TX bytes:173958 (169.8 Kb)

lo        Lien encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3583 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3583 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          RX bytes:1793200 (1.7 Mb)  TX bytes:1793200 (1.7 Mb)

ppp0      Lien encap:Protocole Point-à-Point  
          inet adr:80.125.126.58  P-t-P:80.125.126.1  Masque:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:505 errors:0 dropped:0 overruns:0 frame:0
          TX packets:570 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:3 
          RX bytes:307749 (300.5 Kb)  TX bytes:161997 (158.2 Kb)

Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
80.125.126.1    0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
0.0.0.0         80.125.126.1    0.0.0.0         UG    0      0        0 ppp0
# ping IP ?              [ OK ]
# test DNS resolution ?  [ OK ]

Reply via email to