Salut, fedora core development, 2.6.6 (mais ca arrivait avec des kernels plus anciens).
Apres un ifconfig eth0 down puis un rmmod eagle_usb, je fais # modprobe eagle-usb # eaglectrl -d J'ai, dans dmesg [eagle-usb] driver V2 loaded [eagle-usb] New USB ADSL device detected, waiting for DSP code... [eagle-usb] Interface 0 accepted. [eagle-usb] created proc entry at : /proc/driver/eagle-usb/001-003 usbcore: registered new driver eagle-usb [eagle-usb] ioctl EU_IO_OPTIONS received [eagle-usb] ioctl EU_IO_DSP received [eagle-usb] Loading DSP code to device... [eagle-usb] DSP code successfully loaded to device Badness in wait_ms at /home/pat/rpmbuild/BUILD/eagle-usb-1.9.7/driver/Boot.c:42 [<0a9a5d38>] IdmaUploadSwapPage+0x16b/0x248 [eagle_usb] [<0a9a4c64>] eu_irq+0xd3/0x149 [eagle_usb] [<02214c57>] usb_hcd_giveback_urb+0x14/0x1d [<0a831c49>] finish_urb+0x7e/0xa3 [ohci_hcd] [<0a832a83>] dl_done_list+0x4f/0xbd [ohci_hcd] [<0a83333d>] ohci_irq+0xc5/0x130 [ohci_hcd] [<02214c86>] usb_hcd_irq+0x26/0x4b [<02107077>] handle_IRQ_event+0x21/0x41 [<0210730a>] do_IRQ+0xf3/0x169 ======================= [<0210403b>] default_idle+0x23/0x26 [<0210408c>] cpu_idle+0x1f/0x34 [<02318526>] start_kernel+0x183/0x185 Ce qui n'empeche pas la suite de bien se derouler (voici la fin du dmesg et puis j'ai reussi a envoyer le mail) : [eagle-usb] Modem operational !! divert: allocating divert_blk for eth0 [eagle-usb] Ethernet device eth0 created. eth0: no IPv6 routers present J'ai aussi ca au demarrage sauf qu'il arrive pas forcement a montrer les details: [eagle-usb] DSP code successfully loaded to device Badness in wait_ms at /home/pat/rpmbuild/BUILD/eagle-usb-1.9.7/driver/Boot.c:42 Stack pointer is garbage, not printing trace Pat
