Hi Kenneth, I think I’m using version 0.6.10. This from the easy_install executable:
# EASY-INSTALL-ENTRY-SCRIPT: 'distribute==0.6.10','console_scripts',’easy_install’ I replaced “python ./setup.py install” with “easy_install” in the three places it appears, and I’m still getting the same message. I have been using this same method (apart from the change to easy_install) for several months now, for the most part with no problems. Cheers, Ben > On 10/11/2015, at 4:24 PM, Kenneth Hoste <[email protected]> wrote: > > Hi Ben, > > What version of setuptools (the Python module) do you have on this system? > > It seems like it's not preserving the setup.py symlink when trying to install > vsc-install... > > Can you try installing the EasyBuild components with the command below > instead, rather than using "setup.py install"? > The '.' is required at the end. > > easy_install --prefix=<prefix> . > > Let us know if using easy_install (which is provided by setuptools) helps. > I would expect it doesn't, but you never know with Python packaging issues. > ;-) > > > regards, > > Kenneth > > On 10/11/15 04:15, Ben Roberts wrote: >> Hi Kenneth, >> >> This is the output I get: >> >> <snip> >> Installed >> /home/brob695/easybuild_installed/lib/python2.6/site-packages/easybuild_framework-2.4.0.dev0-py2.6.egg >> Processing dependencies for easybuild-framework==2.4.0.dev0 >> Searching for vsc-base>=2.2.4 >> Reading >> http://pypi.python.org/simple/vsc-base/ >> >> Best match: vsc-base 2.4.12 >> Downloading >> https://pypi.python.org/packages/source/v/vsc-base/vsc-base-2.4.12.tar.gz#md5=fcb338f661313ca198809da137394a42 >> >> Processing vsc-base-2.4.12.tar.gz >> Running vsc-base-2.4.12/setup.py -q bdist_egg --dist-dir >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/egg-dist-tmp-5Xlu8j >> run_tests from base dir /tmp/easy_install-WIXiEY/vsc-base-2.4.12 (using >> executable /tmp/easy_install-WIXiEY/vsc-base-2.4.12/setup.py) >> generated packages list: ['vsc', 'vsc.utils'] >> cleanup lib/vsc_base.egg-info >> removing 'lib/vsc_base.egg-info' (and everything under it) >> makesetupcfg set to True, (re)creating setup.cfg >> New target = {'maintainer': 'Stijn De Weirdt;Jens Timmermans;Andy >> Georges;Kenneth Hoste', 'version': '2.4.12', 'install_requires': >> ['vsc-install >= 0.9.3'], 'scripts': ['bin/logdaemon.py', >> 'bin/startlogdaemon.sh', 'bin/bdist_rpm.sh', 'bin/optcomplete.bash'], >> 'setup_requires': ['vsc-install >= 0.9.3'], 'maintainer_email': ' >> [email protected];[email protected];[email protected];[email protected]', >> 'zip_safe': 1, 'author_email': >> '[email protected];[email protected];[email protected];[email protected] >> ', 'packages': ['vsc', 'vsc.utils'], 'package_dir': {'': 'lib'}, 'name': >> 'vsc-base', 'author': 'Stijn De Weirdt;Jens Timmermans;Andy Georges;Ke >> nneth Hos >> te', 'url': ' >> https://github.com/hpcugent/vsc-base', 'download_url': >> 'https://github.com/hpcugent/vsc-base/tarball/master >> ', 'cmdclass': {'test': <class shared_setup_dist_only.VscTestCommand at >> 0xf4e1d0>, 'bdist_rpm': <class shared_setup_dist_only.vsc_bdist_rpm at >> 0xf31950>, 'egg_info': <class shared_setup_dist_only.vsc_egg_info at >> 0xf317d0>, 'install_scripts': <class >> shared_setup_dist_only.vsc_install_scripts at 0xf31890>, 'sdist': <class >> shared_setup_dist_only.vsc_sdist at 0xf31770>}, 'test_suite': 'test'} >> Checking .pth file support in . >> /usr/bin/python -E -c pass >> Searching for vsc-install>=0.9.3 >> Reading >> http://pypi.python.org/simple/vsc-install/ >> >> Found link: >> https://pypi.python.org/packages/source/v/vsc-install/vsc-install-0.9.3.tar.gz#md5=867900d4e14dcc324adcfa41176742c7 >> >> Found link: >> https://pypi.python.org/packages/source/v/vsc-install/vsc-install-0.9.6.tar.gz#md5=8b8c84021d7741e1e2118b6d42e39747 >> >> Best match: vsc-install 0.9.6 >> Downloading >> https://pypi.python.org/packages/source/v/vsc-install/vsc-install-0.9.6.tar.gz#md5=8b8c84021d7741e1e2118b6d42e39747 >> >> Validating md5 checksum for >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6.tar.gz >> Processing vsc-install-0.9.6.tar.gz >> Unpacking vsc-install-0.9.6 to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6 >> Unpacking vsc-install-0.9.6/LICENSE to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/LICENSE >> Unpacking vsc-install-0.9.6/PKG-INFO to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/PKG-INFO >> Unpacking vsc-install-0.9.6/README.md to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/README.md >> Unpacking vsc-install-0.9.6/lib to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib >> Unpacking vsc-install-0.9.6/lib/vsc to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc >> Unpacking vsc-install-0.9.6/lib/vsc/__init__.py to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc/__init__.py >> Unpacking vsc-install-0.9.6/lib/vsc/fancylogger.py to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc/fancylogger.py >> Unpacking vsc-install-0.9.6/lib/vsc/install to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc/install >> Unpacking vsc-install-0.9.6/lib/vsc/install/__init__.py to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc/install/__init__.py >> Unpacking vsc-install-0.9.6/lib/vsc/install/headers.py to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc/install/headers.py >> Unpacking vsc-install-0.9.6/lib/vsc/install/shared_setup.py to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc/install/shared_setup.py >> Unpacking vsc-install-0.9.6/lib/vsc/install/testing.py to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc/install/testing.py >> Unpacking vsc-install-0.9.6/lib/vsc_install.egg-info to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc_install.egg-info >> Unpacking vsc-install-0.9.6/lib/vsc_install.egg-info/PKG-INFO to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc_install.egg-info/PKG-INFO >> Unpacking vsc-install-0.9.6/lib/vsc_install.egg-info/SOURCES.txt to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc_install.egg-info/SOURCES.txt >> Unpacking vsc-install-0.9.6/lib/vsc_install.egg-info/dependency_links.txt to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc_install.egg-info/dependency_links.txt >> Unpacking vsc-install-0.9.6/lib/vsc_install.egg-info/requires.txt to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc_install.egg-info/requires.txt >> Unpacking vsc-install-0.9.6/lib/vsc_install.egg-info/top_level.txt to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/lib/vsc_install.egg-info/top_level.txt >> Unpacking vsc-install-0.9.6/setup.cfg to >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6/setup.cfg >> error: Couldn't find a setup script in >> /tmp/easy_install-WIXiEY/vsc-base-2.4.12/temp/easy_install-YTL8U4/vsc-install-0.9.6.tar.gz >> <snip> >> >> This is for easybuild-framework, but I see similar results for >> easybuild-easyblocks and easybuild-easyconfigs. >> >> As for what I was doing (the commands), I’ve attached a copy of the shell >> function ‘eb-redeploy’ that I use. The lines giving the problem seem to be >> the python installations (43, 46 and 49). >> >> Regards, >> Ben >> >> >> >> >> >> >>> On 10/11/2015, at 3:59 PM, Kenneth Hoste <[email protected]> >>> wrote: >>> >>> Hi Ben, >>> >>> On 10/11/15 03:41, Ben Roberts wrote: >>> >>>> Hi, >>>> >>>> I have a process that “redeploys” EasyBuild in my working copy by deleting >>>> existing installations (builds, egg files and so on) and then reinstalling >>>> new ones from the active git branches. >>>> >>>> Today, I noticed that when I tried to do this, I got the following message >>>> during instalation: >>>> >>>> error: Couldn't find a setup script in >>>> /tmp/easy_install-xExTSz/vsc-base-2.4.12/temp/easy_install-AfV1IR/vsc-install-0.9.6.tar.gz >>>> >>>> Does anyone have any idea what I could do to fix this problem? It seems a >>>> rather odd one, and perhaps not caused by something in Easybuild itself. >>>> >>> You'll have to provide some more details here... >>> >>> When is this showing up exactly, which command is triggering this, what's >>> the full error message/traceback you're getting? >>> >>> Since recently, vsc-install is a requirement for installing vsc-base, >>> because it provides some shared support for installing of our vsc packages. >>> >>> The setup.py in vsc-install is a symlink to another script, maybe your >>> procedure is tripping over that somehow? >>> >>> >>> regards, >>> >>> Kenneth >>> >
