Hi Ernesto,
On 27/06/2017 21:08, Ernesto Eduardo Diaz Conde wrote:
after do
mkdir -p /tmp/test/lib/python2.7/site-packages
export PYTHONPATH=/tmp/test/lib/python2.7/site-packages:$PYTHONPATH
i run again
easy_install --verbose --prefix /tmp/test easybuild
Are you running all 3 commands in the same session?
The output of easy_install mentions that $PYTHONPATH is defined empty?
regards,
Kenneth
same output
TEST FAILED: /tmp/test/lib/python2.7/site-packages does NOT support
.pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/tmp/test/lib/python2.7/site-packages
and your PYTHONPATH environment variable currently contains:
''
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://pythonhosted.org/setuptools/easy_install.html#custom-installation-locations
Please make the appropriate changes for your system and try again.
2017-06-27 15:36 GMT-03:00 Kenneth Hoste <[email protected]
<mailto:[email protected]>>:
Dear Ernesto,
OK, I overlooked some, try this please:
mkdir -p /tmp/test/lib/python2.7/site-packages
export PYTHONPATH=/tmp/test/lib/python2.7/site-packages:$PYTHONPATH
easy_install --verbose --prefix /tmp/test easybuild
regards,
Kenneth
On 27/06/2017 19:05, Ernesto Eduardo Diaz Conde wrote:
this is the output for
easy_install --verbose --prefix /tmp/test easybuild
admremote@monitoring-system:~$ easy_install --verbose --prefix
/tmp/test easybuild
TEST FAILED: /tmp/test/lib/python2.7/site-packages does NOT
support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/tmp/test/lib/python2.7/site-packages
and your PYTHONPATH environment variable currently contains:
''
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one
that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH
environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth"
files by
using one of the approaches described here:
https://pythonhosted.org/setuptools/easy_install.html#custom-installation-locations
<https://pythonhosted.org/setuptools/easy_install.html#custom-installation-locations>
Please make the appropriate changes for your system and try again.
2017-06-27 13:46 GMT-03:00 Kenneth Hoste <[email protected]
<mailto:[email protected]>>:
Hi Ernesto,
(let's keep the mailing list in CC, since this may help
others in the future)
I meant try this:
easy_install --verbose --prefix /tmp/test easybuild
regards,
Kenneth
On 27/06/2017 17:15, Ernesto Eduardo Diaz Conde wrote:
Hello Kenneth
I arrived las week to the office, i see the notification of
the new version of easybuild, but i continue having the same
error. i do what you tell me
Can you try with "easy_install --verbose ..." to see if that
gives more information and what goes wrong?
this was the outputadmremote@monitoring-system:~$
easy_install --verbose
error: No urls, filenames, or requirements specified (see
--help)
2017-06-15 11:52 GMT-03:00 Ernesto Eduardo Diaz Conde
<[email protected] <mailto:[email protected]>>:
i download the page from the system using wget
2017-06-15 11:48 GMT-03:00 Kenneth Hoste
<[email protected] <mailto:[email protected]>>:
On 15/06/2017 16:33, Ernesto Eduardo Diaz Conde wrote:
2017-06-15 6:02 GMT-03:00 Kenneth Hoste
<[email protected]
<mailto:[email protected]>>:
Dear Ernesto,
It seems that setuptools isn't able to download
EasyBuild from PyPI () for some reason.
Are you seeing the same problem with this command?
easy_install --prefix /tmp/test easybuild
Yes with command the error is the same
Can you try with "easy_install --verbose ..." to see
if that gives more information and what goes wrong?
Is https://pypi.python.org/pypi/easybuild
<https://pypi.python.org/pypi/easybuild>
reachable from that system
Yes the page is reachable fron the system
How did you test this exactly, which command did you
run?
regards,
Kenneth
If not, you can try the offline mode supported
by the bootstrap script, see
http://easybuild.readthedocs.io/en/latest/Installation.html#offline-bootstrapping-using-supplied-source-tarballs
<http://easybuild.readthedocs.io/en/latest/Installation.html#offline-bootstrapping-using-supplied-source-tarballs>
.
I will try this. Tanks for help me
regards,
Ernesto
On 14/06/2017 15:31, Ernesto Eduardo Diaz Conde
wrote:
here is the output
2017-06-14 10:11 GMT-03:00 Ernesto Eduardo
Diaz Conde <[email protected]
<mailto:[email protected]>>:
Thanks Kenneth,
The error was the same in diferents OS, in
debian 8, and CentOS 7.3, i will run the
comands that you send me and send the output
Regards
Ernesto
2017-06-13 17:38 GMT-03:00 Kenneth Hoste
<[email protected]
<mailto:[email protected]>>:
Hi Ernesto,
Hmm, it's not clear to me what's going
wrong here.
Which OS are you on?
Can you try bootstrapping EasyBuild
with debugging enabled, as follows:
export EASYBUILD_BOOTSTRAP_DEBUG=1
python bootstrap_eb.py $PREFIX 2>&1 |
tee eb_bootstrap_debug.out
And then send back eb_bootstrap_debug.out?
regards,
Kenneth
On 13/06/2017 21:00, Ernesto Eduardo
Diaz Conde wrote:
Hello
I have tried installing the new
version of EasyBuil and am getting an
error like this:
[[INFO]] installing EasyBuild with
'easy_install --quiet --upgrade
--prefix=/tmp /tmpGNtTsT/eb_stage1
easybuild'
[[ERROR]] Running 'easy_install
--quiet --upgrade
--prefix=/tmp/tmpGNtTsT/eb_stage1
easybuild' failed: error: Could not
find suitable distribution for
Requirement.parse('easybuild')
Traceback (most recent call last):
File "bootstrap_eb.py", line 337,
in run_easy_install
easy_install.main(args)
File
"/usr/local/lib/python2.7/dist-packages/setuptools/command/easy_install.py",
line 2265, in main
**kw
File
"/usr/lib/python2.7/distutils/core.py",
line 169, in setup
raise SystemExit, "error: " +
str(msg)
SystemExit: error: Could not find
suitable distribution for
Requirement.parse('easybuild')
I would appreciate the help if
someone has already solved it
