Dear all,I am trying to compile foss-2017a on a Debian system. OpenMPI builds to the end, but when FFTW is using it for its checks, it throws an error (see below). The same happenes with foss-2017b. On a CentOS 7 based machine, both compile without error.
Do you have an idea, if an OS dependency might be missing? Did anybody succeed building foss on Debian?
Best regards, Holger This is the step failing:mpirun -np 1 /home/ms/f/fhms166656/.local/easybuild/build/FFTW/3.3.6/gompi-2017a/fftw-3.3.6-pl2/mpi/mpi-bench --verbose=1 --verify 'ofrd5x4x12v6' --verify 'ifrd5x4x12v6' --verify 'obcd5x4x12v6' --verify 'ibcd5x4x12v6' --verify 'ofcd5x4x12v6' --verify 'ifcd5x4x12v6' --verify 'ok7hx13e10x13b' --verify 'ik7hx13e10x13b' --verify 'obr[7x7v1' --verify 'ibr[7x7v1' --verify 'obc[7x7v1' --verify 'ibc[7x7v1' --verify 'ofc[7x7v1' --verify 'ifc[7x7v1' --verify 'ok]8hx6o01x4hx11e10' --verify 'ik]8hx6o01x4hx11e10' --verify 'obr9x6' --verify 'ibr9x6' --verify 'ofr9x6' --verify 'ifr9x6' --verify 'obc9x6' --verify 'ibc9x6' --verify 'ofc9x6' --verify 'ifc9x6' --verify 'ok6e10x12e10' --verify 'ik6e10x12e10' --verify 'ofr]9x4x9x10' --verify 'ifr]9x4x9x10' --verify 'obc]9x4x9x10' --verify 'ibc]9x4x9x10' --verify 'ofc]9x4x9x10' --verify 'ifc]9x4x9x10' --verify 'ofrd]10x8x8x12' --verify 'ifrd]10x8x8x12' --verify 'obcd]10x8x8x12' --verify 'ibcd]10x8x8x12' --verify 'ofcd]10x8x8x12' --verify 'ifcd]10x8x8x12' --verify 'ofrd]2x8x8v7' --verify 'ifrd]2x8x8v7' --verify 'obcd]2x8x8v7' --verify 'ibcd]2x8x8v7'
-------------------------------------------------------------------------- A requested component was not found, or was unable to be opened. This means that this component is either not installed or is unable to be used on your system (e.g., sometimes this means that shared libraries that the component requires are unable to be found/loaded). Note that Open MPI stopped checking at the first component that it did not find. Host: fb11-nx-main Framework: ess Component: pmi --------------------------------------------------------------------------[fb11-nx-main:23484] [[INVALID],INVALID] ORTE_ERROR_LOG: Error in file runtime/orte_init.c at line 116
-------------------------------------------------------------------------- It looks like orte_init failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during orte_init; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): orte_ess_base_open failed --> Returned value Error (-1) instead of ORTE_SUCCESS -------------------------------------------------------------------------- -------------------------------------------------------------------------- It looks like MPI_INIT failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during MPI_INIT; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): -- Westfälische Wilhelms-Universität Münster (WWU) Zentrum für Informationsverarbeitung (ZIV) Röntgenstraße 7-13 48149 Münster +49-(0)251-83 31569 [email protected] www.uni-muenster.de/ZIV
smime.p7s
Description: S/MIME Cryptographic Signature
