Hi Ole, That still isn't the error; there should be the actual line, doing whatever compilation or linking, that failed. They just tend to be somewhere in middle of the huge output from the make command (even worse with parallel builds). You can put the entire log in some pastebin and someone is (probably) willing to take a look.
I've built the entire 2019a toolchains on skylake server (with AVX512), without any modifications to any configs or blocks (on a virtual machine though, but all CPU features were exposed to the VM) Best regards, Mikael On Wed, Feb 20, 2019 at 8:58 PM Ole Holm Nielsen <[email protected]> wrote: > Hi Åke, > > The make actually fails as shown below. There are hundreds of configure > and checking lines above the lines I display, and the first make command > fails as shown in the output. > > Can you suggest anything else to check? Are there issues with AVX512 on > Skylake, and if so, how to work around it? > > FYI, the foss-2018a and foss-2018b toolchains have been built without > problems on the Skylake node. > > Thanks, > Ole > > > On 20-02-2019 18:01, Åke Sandgren wrote: > > That's not the real problem. > > You have to look through that log and figure out what it really is. > > I.e., where does the make actually fail. > > > > On 2/20/19 4:10 PM, Ole Holm Nielsen wrote: > >> On 2/20/19 2:45 PM, Åke Sandgren wrote: > >>> What is the actual error? Look in > >>> /tmp/eb-dyNH9x/easybuild-binutils-2.31.1-20190220.140138.qdBpn.log > >> > >> It's: > >> > >> $ tail > /tmp/eb-dyNH9x/easybuild-binutils-2.31.1-20190220.140138.qdBpn.log > >> config.status: executing default commands > >> make[1]: Leaving directory > >> `/home/modules/build/binutils/2.31.1/dummy-/binutils-2.31.1' > >> make: *** [all] Error 2 > >> (at easybuild/tools/run.py:501 in parse_cmd_output) > >> == 2019-02-20 14:02:45,435 easyblock.py:2870 WARNING build failed (first > >> 300 chars): cmd " env LIBS='-Wl,-rpath=/usr/lib -Wl,-rpath=/usr/lib64' > >> make -j 80 CFLAGS="-g -O2 -fPIC" " exited with exit code 2 and output: > >> make[1]: Entering directory > >> `/home/modules/build/binutils/2.31.1/dummy-/binutils-2.31.1' > >> make[1]: Nothing to be done for `all-target'. > >> Configuring in ./libiberty > >> Config > >> == 2019-02-20 14:02:45,435 easyblock.py:288 INFO Closing log for > >> application name binutils version 2.31.1 > > > > >
