Thank you very much, Terje! maxparallel = 1 did the job!
/Jakob -- Jakob Schiøtz, professor, Ph.D. Department of Physics Technical University of Denmark DK-2800 Kongens Lyngby, Denmark http://www.fysik.dtu.dk/~schiotz/ > On 2 Feb 2020, at 20.17, Terje Kvernes <[email protected]> wrote: > > Hi Jakob, > > According to > https://easybuild.readthedocs.io/en/latest/version-specific/easyconfig_parameters.html > it would seem that setting > > maxparallel = 1 > > Or (or possibly and, I have not tested this) > > parallel = 1 > > In the EasyConfig should do the trick. > > -- > Terje Kvernes > >> On 2 Feb 2020, at 20:03, Jakob Schiøtz <[email protected]> wrote: >> >> Dear all, >> >> I am trying to compile ELPA with the 2019b toolchains. I made a new >> easyconfig file based on the old one, and that works fine for the >> intel/2019b toolchain. But for the foss/2019b toolchain it fails with a >> compilation error. It is a .mod file missing, and since .mod files >> apparently are some kind of output files from the Fortran compiler, I >> suspected a problem with the parallel build (EasyBuild uses "make -j 48" on >> a 24-core machine with hyperthreading). Indeed, compiling with --parallel=1 >> solves the problem. >> >> How do I make this the default behaviour in the EasyConfig? >> >> Obviously, the correct solution would be to fix the upstream >> Autotools-generated Makefile, but that is beyond me. >> >> /Jakob >> >> -- >> Jakob Schiøtz, professor, Ph.D. >> Department of Physics >> Technical University of Denmark >> DK-2800 Kongens Lyngby, Denmark >> http://www.fysik.dtu.dk/~schiotz/ >> >> >>
