Ok, I think I now what's happening to you, because I have that problem too... On this server, only got one interface, configured initially as dhcp client, everything working fine. One day, had to change it to static, done it, everything is working fine. Now, have to put it dhcp client again, I can get ip from dhcp server, but no gateway/exit route! I've done all this setup through the eBox interface to avoid bypassing the eBox interface t apply new configurations. Now, the only way for me to exit my subnet in this server is:
a) run manually dhclient eth0 b) set the interface as static I assume this has got to do with some cached dhcp client stuff, no? PS: if I change the address on the dhcp server for this mac, the machine get's the new IP, but allways with no gateway... Sex, 2008-06-06 às 12:47 +0100, nicolas diogo escreveu: > Thanks David, > > the cable is always connected, thus i assume the network is always up. > > first option did not work, while the second worked fine. > > i considered this option but i assumed that ebox scripts would run > after the rc.local file. > > regards, > > > Nicolas > > > > ______________________________________________________________________ > Sent from Yahoo! Mail. > A Smarter Email. > > _______________________________________________ > Ebox-user mailing list > [email protected] > https://lists.warp.es/mailman/listinfo/ebox-user
_______________________________________________ Ebox-user mailing list [email protected] https://lists.warp.es/mailman/listinfo/ebox-user
