El mar, 07-04-2009 a las 22:42 -0300, Eden Meireles escribió: > > Hi folks,
Hi Eden, > first of all, I'd like to congratulate everyone involved at this job. > The ebox program really made my sysadmin life pretty much easier! > Lately, when I try to save my DHCP changes (basically fixed addresses > changes), the ebox interface stops at the "saving" screen and the > modifications are never saved. Sometimes, the interface presents my > modifications but the dhcpd.conf does not have them and the mac > address that should get the ips I told'em to in the interface, does > not work. Could you try to run this command from console? $ sudo /etc/init.d/ebox dhcp restart And see if changes have been made in your conf files. > Here is what I get on /var/log/ebox/ebox.log > > 2009/04/07 21:58:09 ERROR> Sudo.pm:185 EBox::Sudo::_rootError - root > command /usr/bin/test -f > '/var/lib/ebox/conf/dhcp/eth1:visitante/firmware' failed. > Error output: > Command output: . > Exit value: 1 > > Acctually, there're a lot of those errors, one for each interface I've > created. This is a known issue and it is controlled. Don't worry about it. Best, _______________________________________________ Ebox-user mailing list [email protected] https://lists.warp.es/mailman/listinfo/ebox-user
