[ECI] toujours ppp0

[fressenon jean_marie]

voila j'ai plus d'information voila ce que �a m'affiche a l'ecran lors d'une tentative de connexion   [root@TB /]# startmodem | tee log which: no eci-load1 in (/bin:/sbin:/usr/bin:/usr/sbin) which: no eci-load2 in (/bin:/sbin:/usr/bin:/usr/sbin) test : /usr/local/bin/eci-load1 Loading UHCI support Init modem ... Load Firmware ... Block 1 : Addr 0x7f92 - Length 1 : Ok ......... ......... Block 400 : Addr 0x167b -/proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/003: No such file or directory /proc/bus/usb/001/003: No such file or directory /proc/bus/usb/001/003: No such file or directory /proc/bus/usb/001/003: No such file or directory Length 2 : Ok Block 401 : Addr 0x167d - Length 16 : Ok ......... ......... Block 452 : Addr 0x7f92 - Length 1 : Ok ECI Load 1 : Success I found your GlobeSpan USB ADSL WAN Modem (in less than 1562 ms) : GREAT! ... Load Firmware OK Setup modem ... Block 1 : request_type=c0 request=de value=0000 index=0000 size=000d : Ok ff ff ff ff ff ff ff 01 00 00 00 ff 00 Block 2 : request_type=40 request=d0 value=0000 index=0000 size=000a : Ok ......... ........ Block 259 : request_type=40 request=dc value=0000 index=0000 size=0000 : Ok waiting ...     a ce moment la plus rien ne se passe         voila ce que �a m'afiche quand je lance eci-doctor.sh   [root@TB bin]# eci-doctor.sh You are using linux kernel version 2.4.7-10 Support for USB is OK Preliminary USB device filesystem is OK UHCI support is missing... trying to load /lib/modules/2.4.7-10/kernel/drivers/usb/uhci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.7-10/kernel/drivers/usb/uhci.o: insmod /lib/modules/2.4.7-10/kernel/drivers/usb/uhci.o failed /lib/modules/2.4.7-10/kernel/drivers/usb/uhci.o: insmod uhci failed UHCI support is OK /dev/ppp is OK HDLC support is OK HDLC support is buggy, you should apply the HDLC patch to your kernel source. See the howto in the doc directory or on http://eciadsl.sourceforge.net/ in the Documentation section for further instructions. dabusb module is not loaded: OK Loading EZ-USB firmware... Block 1 : Addr 0x7f92 - Length 1 : Ok ............ ........... Block 452 : Addr 0x7f92 - Length 1 : Ok ECI Load 1 : Success /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/000: No such file or directory /proc/bus/usb/001/003: No such file or directory /proc/bus/usb/001/003: No such file or directory /proc/bus/usb/001/003: No such file or directory /proc/bus/usb/001/003: No such file or directory I found your GlobeSpan USB ADSL WAN Modem (in less than 1567 ms) : GREAT! Loading the GlobeSpan firmware... Block 1 : request_type=c0 request=de value=0000 index=0000 size=000d : Ok ff ff ff ff ff ff ff 01 00 00 00 ff 00 ............ ............ Block 259 : request_type=40 request=dc value=0000 index=0000 size=0000 : Ok waiting ..   et voila c fini , �a ne bouge plus !     ce qui est surprenant c que ma connexion marchait il n'y a pas longtemps , il n'y avait aucun probleme  mais maintenat �a ne veut plus se connecter  si �a peut aider quand je fait ifconfig je n'ai pas de ligne ppp0 et quand je fais route add default dev ppp0  j'obtiens une erreur comme quoi il ne connait pas le peripherique                     Merci de votre aide