dear support I am trying to use your package eciadsl-usermode-0.5-2.i586.rpm
[ I had not realised that the packet was designed for ECI USB ADSL. A friend had said it would work also with the ericsson adsl] (your comments in howto.txt concern the R�f�rence : archive usermode-X.Y.tgz pr�sente sur http://eciadsl.sourceforge.net/, section Downloads. Using the rpm packet no make & make install commands should be given, I think) I use an adsl model ericsson HM120dp on LINUX red hat 7.3 (provided now by Italian Telecom. Beforehand the Alcatel speed touch modem was used. Then they replaced it with the ericsson model) after installing the packge with the command rpm -i eciadsl-usermode-0.5-2.i586.rpm and updating the the adsl file as described in your hoto.html I run the command you advice receiving the following script root@localhost bin]# startmodem | tee log.txt the system answers which: no eci-load1 in (/bin:/sbin:/usr/bin:/usr/sbin) test : /usr/local/bin/eci-load1 which: no eci-load2 in (/bin:/sbin:/usr/bin:/usr/sbin) Init modem ... I can't find your modem... sorry :-( from typing ./eci-doctr.sh I get You are using linux kernel version 2.4.18-3 Support for USB is OK Preliminary USB device filesystem is OK UHCI support is OK OHCI support is OK /dev/ppp is OK HDLC support is OK HDLC support is OK (no bug) dabusb module is not loaded: OK then I looked at my usb devices file and I replaced the vendor and id in the startmodem file with the correct for the modem adsl I use P: Vendor=08ea ProdID=00ca Rev= 1.00 <------------- this information S: Manufacturer=GlobeSpan Inc. S: Product=USB-ADSL Modem S: SerialNumber=7FA55B Now the startmodem program went further , up to Init modem ... Setup modem ... Can't find your GlobeSpan USB ADSL WAN Modem ECI Load 2 : failed! Failed to setup the modem the problem is , I guess, that in the binary file /etc/eciadsl/eci_wan3.bin there are not the proper information about my modem ..Can't find your GlobeSpan USB ADSL WAN Modem... Since the /etc/eciadsl/eci_wan3.bin file is binary I am stack at this point. unless someone provides the proper file best wishes Maurizio byer the way, I cannot access the site > > => See http://eciadsl.flashtux.org/modems.php?lang=en, I get an ampty screen when I click on it. best wishes > Web: http://www.flashtux.org - email: [EMAIL PROTECTED] > Jabber: [EMAIL PROTECTED] - AIM: FlashCode AIM - ICQ: 160677660 > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org > Archives de cette liste de diffusion: http://liste.eci.free.fr > Pour se desinscrire: mailto:eci-request@;ml.free.fr?subject=unsubscribe > Maurizio Biasini Home page http://diaf3.bologna.enea.it/biasini/home.html Home via Nosadella 34 40123 Bologna tel/FAX +39 051 6440220 e-mail [EMAIL PROTECTED] ENEA Via Don Fiammelli 2 40128 Bologna Italy tel +39 051 6098155 FAX +39 051 6098359 LAB via Biancafarina 2521 40060 Medicina tel +39 051 856152 e-mail [EMAIL PROTECTED] =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org Archives de cette liste de diffusion: http://liste.eci.free.fr Pour se desinscrire: mailto:eci-request@;ml.free.fr?subject=unsubscribe
