Hi FlashCode (and all the others), thanx for your help. I tried all that synch-files and indead there were 2 that fit. Now I got though the whole setup-Mmdem process but still can't get any connection. I think the reason is, that my internet provider is using PPTP(RFC 2637) instead of PPPOE. Is there now any possibility to use eciadsl with PPTP??
Exm.: ****************** I read in several docus, that there has to be a PPTP-client and it must be installed manually. I made this. Now I tried to connect with pptp hostname (or IP) where hostip = 10.0.0.138 .. doing this I got only errors. Of course i had to get them, because there's no modem at a network-adaptor which can be called by a ref to 10.0.0.138. ==> This I think would be the base to get PPTP to work. So do you know about a way to get PPTP to work with eciadsl??! ****************** Thanx in advise, Regards Ren� +++++++++++++++++++++++++++++++++ Millautz Ren� Student of Telematics at TU-Graz [EMAIL PROTECTED] -----Urspr�ngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:eci-owner@;ml.free.fr] Im Auftrag von FlashCode Gesendet: Freitag, 25. Oktober 2002 10:02 An: [EMAIL PROTECTED] Betreff: [ECI] Re: Synch Problem MILLAUTZ Ren� wrote: > Hi all! > > I saw that this is a more or less french mailinglist, but I don�t > understand french at all. So I�ll write in english and I hope that this > isn�t a problem. > Now to my Problem: > ---------------------------------------------------------------- > I followed the instructions in the readme-file (which is written in > frensch and I tried to understand as well as possible) and installed the > package under my Linux distro. Afterwards I edited the �adsl�, > �chap-secrets� and �pap-secrets� file and run the startmodem script. So > far so good. Initialising and Firmwareload were done well, but the > modem-setup stoppet at block 166, writing �waiting...�. > So I read the FAQ at the Webpage etc. and decided to do my own > synch.-file, as it�s recomended in the FAQ. > I did this whit the usb-sniffer software which is in the tutorial on the > webpage. (btw. I can�t explain, but the log file didn�t stop to grow. It > gotta blew up to about 1 GB , even I removed the filter - after > restarting windows, it stopped?! So it was very difficult to get a file > which is about 10 megs of size. After 3 turns I was early enough with > copiing, that the size was about that 10 megs. � Perhaps it�s crashed?!) > Running the startmodem script again, whith my new synch-file (created > with the script) I got about 20 Blocks further then before, but it still > sucks. > Now I don�t know what to do anymore. I think it�s still the synch file, > which doesn�t fit, but I don�t know how to get or construct a better > one. > > So here are the details of my System running: > ******************************************************* > - kernel version : 2.4.16-4G (updatet from 2.4.4-4GB distro update) > - Linux distribution : SuSe 7.2 > - pppd version : 2.4.0 > - moutils version : 2.4.5 > - USB Controller (HUB) model : 00:01.2 USB Controller: SIS 7001 (rev 07) > , 00:01.3 USB Controller: SIS 7001 (rev 07) > - eciadsl driver version : See Version File (attached) > - windows driver info if you use it : Driver :1.11.0007Q-A (LanUsb) | > Firmware: Q43 | Panel: 3.1.10 > - modulation of provider : G.DMT > - the synch .bin : See synch.bin (attached) > - USB/ethernet modem model : Zyxel Prestige 630-41 (Globespan Chipset) > - location (country/state/region/town), Austria/-/Syria/Graz > - provider : TU-Graz > - Linux experience level : Newbie > > I hope anybody can help me with that problem. I am a real Linux-Newbie > and only worked on Windows yet so please be patiant :o) > Thanx in advise for any of your comments and sorry for writing not in > french :o) > > Regards, > Ren� > > > +++++++++++++++++++++++++++++++++ > Millautz Ren� > Student of Telematics at TU-Graz > [EMAIL PROTECTED] Hi Ren�, Before making your own .bin file, you can try all the .bin of synch_bin archive : http://eciadsl.flashtux.org/eciadsl_synch_bin.tar.gz Unpack this into /etc/eciadsl and run eciconftxt.sh to change your .bin Between each attempt, unplug/replug your modem. Keep us informed of the result. If no .bin works, you can come on IRC, we'll help you. Read you soon, Cordialement / Best regards Sebastien. Web: http://www.flashtux.org - email: [EMAIL PROTECTED] Jabber: [EMAIL PROTECTED] - AIM: FlashCode AIM - ICQ: 160677660 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org Archives de cette liste de diffusion: http://liste.eci.free.fr Pour se desinscrire: mailto:eci-request@;ml.free.fr?subject=unsubscribe =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org Archives de cette liste de diffusion: http://liste.eci.free.fr Pour se desinscrire: mailto:eci-request@;ml.free.fr?subject=unsubscribe
