Je commence a desesperer
Je viens d'essayer la version 0.6-pre6...........ca ne
marche toujours pas !!!
J'ai egalement essaye la version
0.6-pre7................c'est toujours la meme chose
Pour cette dernier version, voici le resultat de startmodem
:
setting up USB support (1/5)..
loading UHCI support
usb-uhci loaded successfully
loading firmware (2/5)..
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/003: No such file or directory
/proc/bus/usb/001/003: No such file or directory
/proc/bus/usb/001/003: No such file or directory
/proc/bus/usb/001/003: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/004: No such file or directory
/proc/bus/usb/001/004: No such file or directory
/proc/bus/usb/001/004: No such file or directory
GlobeSpan USB ADSL WAN Modem compatible modem found (in
2275ms): GREAT!
ECI load 1: success
firmware loaded successfully
setting up modem (3/5)..
ECI load 2: success
synchronization successful
connecting modem (4/5)..
using channel 13
Using:
vpi.vci=8.35
vendor/product=0x0915/0x8000
verbose level=2
log file=/tmp/pppoeci.log (enabled)
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7d4de3f2>]
LCP: timeout sending Config-Requests
Connection terminated.
Waiting for 1 child processes...
script /appl/DriverEci_06pre7/bin/pppoeci -v 2 -vpi 8 -vci
35 -vendor 0x0915 -product 0x8000 -mode LLC_RFC2364, pid
4222
Script /appl/DriverEci_06pre7/bin/pppoeci -v 2 -vpi 8 -vci
35 -vendor 0x0915 -product 0x8000 -mode LLC_RFC2364 finished
(pid 4222), status = 0x0
failed to connect
Avec eci-doctor.sh :
./eci-doctor.sh
You are using linux kernel version 2.4.18-10
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
ehci-hcd module is not loaded: OK
UHCI support is missing... trying to load
/lib/modules/2.4.18-10/kernel/drivers/usb/uhci.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from
dmesg
/lib/modules/2.4.18-10/kernel/drivers/usb/uhci.o: insmod
/lib/modules/2.4.18-10/kernel/drivers/usb/uhci.o failed
/lib/modules/2.4.18-10/kernel/drivers/usb/uhci.o: insmod
uhci failed
UHCI support is OK
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
Loading EZ-USB firmware...
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/000: No such file or directory
/proc/bus/usb/001/003: No such file or directory
/proc/bus/usb/001/003: No such file or directory
/proc/bus/usb/001/003: No such file or directory
/proc/bus/usb/001/003: No such file or directory
GlobeSpan USB ADSL WAN Modem compatible modem found (in
2010ms): GREAT!
ECI load 1: success
Loading the GlobeSpan firmware...
ECI load 2: success
pppd version 2.4.0
You are using pppd version (untested)
No existing PPP connection... trying to make one (please
wait)
using channel 14
Using:
vpi.vci=8.35
vendor/product=0x0915/0x8000
verbose level=2
log file=/tmp/pppoeci.log (enabled)
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf9e8d36f>]
LCP: timeout sending Config-Requests
Connection terminated.
Waiting for 1 child processes...
script /appl/DriverEci_06pre7/bin/pppoeci -v 2 -vpi 8 -vci
35 -vendor 0x0915 -product 0x8000 -mode LLC_RFC2364, pid
4404
Script /appl/DriverEci_06pre7/bin/pppoeci -v 2 -vpi 8 -vci
35 -vendor 0x0915 -product 0x8000 -mode LLC_RFC2364 finished
(pid 4404), status = 0x0
PPP connection failed: check your vci & vpi parameters in
/etc/ppp/peers/adsl and check for USB errors in
/var/log/messages
J'ai essaye plusieurs mode de connexion (VCM_RFC2364,
LLC_RFC2364)......... toujours pas de Net sous Linux !!!!!!
J'ai essaye tous les fichiers de synchro, toutes les version
des drivers, qu'est-ce que je peux faire de plus !
PS : je ne parviens pas non plus a generer mon propre
fichier de synchro avec UsbSnoop sous Win2000. Je n'ai aucun
fichier de log genere...
Merci pour tout renseignement.
Julien.
\\\|///
\\ - - //
( O O )
----oOOo--(_)-oOOo------------------
Julien Vedie
Paris, France, Europe
---------------Ooooo----------------
( )
ooooO ) /
( ) (_/
\ (
\_)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org
Archives de cette liste de diffusion: http://liste.eci.free.fr
Pour se desinscrire: mailto:[EMAIL PROTECTED]?subject=unsubscribe
