Hello,
I am trying to get eci working with a Dlink DSL-200 Rev B1. I have had
lots of previous success with this model and the modem I have is from a
working installation.
The difference this time, instead of using a redhat/fedora kernel, I am
using my own kernel as I am booting from compact flash (plan 2.4.27). I
have checked and rechecked that I have got all the options I need listed
in the FAQ for the kernel, the interface synchronizes but pppoe can not
establish:
Dec 29 09:32:37 fredo pppd[18381]: Connect: ppp0 <--> /dev/pts/2
Dec 29 09:32:38 fredo pppd[18381]: sent [LCP ConfReq id=0x1 <mru 1492>
<magic 0xd36ca26a>]
Dec 29 09:33:06 fredo last message repeated 9 times
Dec 29 09:33:09 fredo pppd[18381]: LCP: timeout sending Config-Requests
Dec 29 09:33:09 fredo pppd[18381]: Connection terminated.
Dec 29 09:33:09 fredo pppd[18381]: Waiting for 1 child processes...
Dec 29 09:33:09 fredo pppd[18381]: script /usr/sbin/pppoe -p
/var/run/pppoe-adsl.pid.pppoe -I tap0 -T 80 -U -m 1412 -D yes-0, pid
18383
Dec 29 09:33:12 fredo pppoe[18383]: Timeout waiting for PADO packets
Dec 29 09:33:12 fredo pppd[18381]: Script /usr/sbin/pppoe -p
/var/run/pppoe-adsl.pid.pppoe -I tap0 -T 80 -U -m 1412 -D yes-0
finished (pid 18383), status = 0x1
Dec 29 09:33:12 fredo pppd[18381]: Exit.
When I do an ifconfig, I see this:
tap0 Link encap:Ethernet HWaddr 00:FF:AE:23:7A:F6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:96 (96.0 b)
Anyone have any ideas?
I have put up further information which may be helpful (rather then
flood the list):
http://www.enger.org/eci/eciadsl-pppoeci.log.gz
http://www.enger.org/eci/kernel-config
eciadsl.conf:
VID1=2001
PID1=5100
VID2=2001
PID2=5100
MODE=LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
VCI=35
VPI=8
FIRMWARE=/etc/eciadsl/firmware00.bin
SYNCH=/etc/eciadsl/gs7470_synch04.bin
PPPD_USER=test
PPPD_PASSWD=
USE_DHCP=no
USE_STATICIP=no
STATICIP=
GATEWAY=
MODEM=D-Link DSL200 rev B1
PROVIDER=AU..iiNet
DNS1=203.14.168.3
DNS2=203.59.24.3
MODEM_CHIPSET=GS7470
SYNCH_ALTIFACE=5
PPPOECI_ALTIFACE=1
If anyone can help, I would really appreciate it, I am stuck.
Regards,
Matthew Enger
[EMAIL PROTECTED]
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Driver Linux pour modem ECI ADSL USB: http://eciadsl.flashtux.org
Archives de cette liste de diffusion: http://liste.eci.free.fr
Pour se desinscrire: mailto:[EMAIL PROTECTED]
