Thanks for the response, I'll get back with you after I have had a chance to
look it over.
Deanna

----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 13, 1999 2:19 PM
Subject: Re: [ecopath] Greenhouses/Eco Village


> On 13 Sep 99, at 7:58, [EMAIL PROTECTED] wrote:
> >  Please tell us more about how you constructed
> > these greenhouses, cost to build etc.
>
> Here is a brief summary of each greenhouse.  I can expand on this
> material if anything looks interesting.
>
>  Sunroom - This is lean-to addition to the house utilizing recycled
>                  sliding glass doors.  The cost was around $200
>                   and size is 12x7.  This was very easy to build.
>
>  Garden Greenhouse - This is a hoop design using all new materials
>                   and costs less than $400.  The size is 8x12.  The
>                   construction is unique because it uses rivets to hold
>                   fiberglass roofing panels to plastic pipe.  The result
>                   is a surprisingly strong and durable greenhouse.
>
>  Fig Shelter - This is a plywood thermal wall with a glass top.  The
>                    wall contains a water-alcohol solution to avoid freeze
>                    problems and the glass top extend over the fig tree.
>                    Sounds strange, but it works.   Cost was around $80
>                    and about half the materials were recycled.  The water
>                    solution is in 5 gallon plastic buckets that are used
>                    in construction and by restaurants.
>
>  Commercial greenhouse - This is a large 20x40 structure used
>                    extensively by local farmers.  Materials consist of
>                    galvanized pipe and plastic sheeting.  Total cost is
>                    unknown, the basic kit costs around $1200, but
>                    additional materials will be needed.  Construction
>                    is similar to pole buildings.  First the pipe is driven
>                    into the ground, then the arches fit into the pipes.
>                    Supports are added, then the plastic is stretched
>                    over the frame and secured with spring clips.  For
>                    ventilation the sides are rolled up.  Shade cloth is
>                    also used in the summer time if necessary.
>
>  Cloches - My favourite at present are large cones made from semi
>                     rigid plastic.  They are easy to make, easy to  use,
>                     stable in the wind, easy to store,  resist
overheating,
>                     and last forever.  Ours are about 18 inches at the
>                     base and have a 4 inch hole in the top.  Construction
>                     used a template to cut the shape, then fishing line
>                     to hold the two ends together.  Cost depends upon
>                     type of rigid plastic used.
>
> > How do you heat them, keep them watered?  Waht kind of benches etc.
>
> Benches are half sheets of plywood cut lengthwise and covered with
> a sheet of plastic.  Bench legs are from any 4x4 wood laying
> around.  Water is from a spring and from collecting rain.  I need to
> do a better job at rain collection and think all water needs can be
> met by rain water.  This would probably require in-ground storage
> to provide thermal storage in addition to water for plants.
>
> > Love to get feedback from the list .   Best to all.   Frank
>
> Yes, same here.  Does anyone know of additional information sources?
>
>  ----
>
> jeff owens, [EMAIL PROTECTED], http://www.teleport.com/~kowens
>      underground house, solar power, self-reliance, edible landscape
> to leave ecopath:  unsubscribe ecopath -> [EMAIL PROTECTED]
>
>
>
>

Reply via email to