hi,Andrew: when i use arm-elf-gdb to connect target, it's fail,show below: target address:192.168.0.173
(gdb) set debug remote 1 (gdb) target remote 192.168.0.173:9000 Remote debugging using 192.168.0.173:9000 Sending packet: $Hc-1#09...putpkt: Junk: RedBoot> Ack Packet received: Sending packet: $qC#b4...Ack Packet received: Sending packet: $qOffsets#4b...Ack Packet received: Sending packet: $?#3f...Sending packet: $?#3f...Ack Packet received: S05 Sending packet: $Hg0#df...Packet instead of Ack, ignoring it Packet instead of Ack, ignoring it Sending packet: $Hg0#df...Packet instead of Ack, ignoring it Sending packet: $Hg0#df...Packet instead of Ack, ignoring it Sending packet: $Hg0#df...Timed out. Timed out. Timed out. 2008/6/17, Andrew Lunn <[EMAIL PROTECTED]>: > > I capture package with ethereal, found that for any gdb request > > command from host, > > redboot return $#00 (it's mean system don't support this command), why? > > The gdb stub in eCos only supports a subset of the gdb commands. So i > would expect to see some commands rejected. However it should not > reject all commands. The gdn x command to show a region of memory > should work. What happens when you try that? > > Andrew > -- George
