Hi Chris,
I tried your latest STM32 driver and was successfully add USB
slave-side serial drivers package.
when I select enable control the endpoint 0 and enable all usb slave serial
support in configtool.
What is defined data structure in USB IN and OUT endpoint structure in stm32
evel board.
If I mention default data structure,I got compile error (like undefined
reference to usbs_at91_ep1 and usbs_at91_ep2) in usb2serial test program.
Gaurang
Chris Holgate wrote:
>
> Hi folks,
>
> I have just uploaded a new version of the STM32 USB driver here:
>
> www.zynaptic.com/ecos/packages/stm32-usb-20090601.epk
>
> Changes from the last code drop are as follows:
>
> 1) Driver compilation is now switched on and off in CDL using the
> 'enable endpoiont 0' option.
>
> 2) Disabling devtab support is now a CDL constraint on using the driver.
>
> 3) CDL endpoint interfaces are now implemented so that the
> CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS and CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS
> values are set correctly. This should allow the serial slave class
> driver to configure correctly, but it will still need patching to cope
> with dynamic endpoints.
>
> 4) USB support is now added directly into the existing target. See the
> following post for how to safely remove it:
> http://ecos.sourceware.org/ml/ecos-devel/2009-05/msg00079.html
>
> 5) Implemented the last functional TODO's in the source code. Anything
> now marked as a TODO is a feature that it would be nice to have, but
> which is not essential to normal operation.
>
> Chris.
>
>
--
View this message in context:
http://www.nabble.com/Updated-version-of-the-STM32-USB-driver.-tp23812467p23867737.html
Sent from the Sourceware - ecos-devel mailing list archive at Nabble.com.
