Hi, I am looking at adding the Kwikstik to the current Kinetis boards, and I am wondering what would be the best way to approach this.
Currently there are two Kinetis boards, the TWR-K40X256 and TWR-K60N512, with the directory structure something like this: kinetis/var/... - Generic Kinetis code kinetis/twr_k40x256 - K40 and twr-k40 code kinetis/twr_k60x256 - K60 and twr-k60 code Kwikstik is based on the same MCU as the twr-k40x256, so it needs the same MCU-specific code as the twr-k40x256 board, which I think is all, or nearly all of the code currently under the twr_k40x256 directory. I initially thought I'd just clone twr_k40x256 into a new kwikstik directory, but that's probably not the best approach for maintainability. I am thinking it might be better to split out the generic K40 code so it can be shared between distinct boards, but I am not sure where to split this to: should there be a separate k40x256 subdirectory and a corresponding package that the twr_k40x256 requires? Or is there a better way of approaching this altogether? Many thanks in advance, Tomas
