Hi Just an updated on the status of the Embedded Artists LPC2468-32 board in anoncvs.
I have finally got a limping version of RedBoot generated from anoncvs running on this platform in our test farm, and it does run tests generated from anoncvs ecos. Unfortunately both ethernet and flash support for this board appears broken, so lwip and bsd testing is out. When built with flash and/or ethernet support, RedBoot either hangs on startup (if flash support is included) or fails to recognise the ethernet device. So the version of RedBoot I finally installed had broken ethernet and no flash support, but appears to work OK (it has run 4 anoncvs tests in the farm since I re-released it an hour ago, 3 passed and the other, realloc, failed but is also fails in eCosPro so no need to investigate that. I ran tm_basic by hand yesterday built from the default configuration and that also passed). The differences between the eCos and eCosPro BSPs for the Embedded Artists LPC2468-32 board were too different for the tests and RedBoot from different source bases to be compatible. However, before I switched back to anoncvs RedBoot, the test results from eCosPro only were good. The board had run just over 5500 tests and there were no regressions with the tests I could find between our GNU tools and eCos GNU tools 4.6.2-20120125 (apart from the additional warnings during the builds already reported on this list). No bsd configurations were built before I switched. More results later... -- Alex
