You can display the routing table with show_network_tables() in bsd_tcpip/current/src/ecos/support.c
-- Matt --- [EMAIL PROTECTED] wrote: > Gentlemen, > > Thanks for the help on static arp. Now I want to > setup the 2 EMACs so that > packets come from eth0 and rerouted internally by > eCos to eth1 and goes > out from there. However, The receive is working but > rerouting to other > interface internally is NOT happening. I see two > reasons which I need to > resolve: > > 1) Number of "hops" is set to 0. I need to change > hops to >0 number. HOW? > > 2) Routing is not done properly which I doubt this > is the problem. Is > there any easy way to dump the eCos route table and > manipulate it? thanks. > > Michael > > > BOOTP[eth0] op: REPLY > htype: Ethernet > hlen: 6 > hops: 0 > xid: 0x0 > secs: 0 > flags: 0x0 > hw_addr: 02:10:12:01:00:08 > client IP: 192.168.1.8 > my IP: 192.168.1.8 > server IP: 192.168.1.8 > gateway IP: 192.168.1.8 > options: > subnet mask: 255.255.255.0 > IP broadcast: 192.168.1.255 > gateway: 192.168.1.8 > BOOTP[eth1] op: REPLY > htype: Ethernet > hlen: 6 > hops: 0 > xid: 0x0 > secs: 0 > flags: 0x0 > hw_addr: 02:10:12:01:00:09 > client IP: 192.168.2.8 > my IP: 192.168.2.8 > server IP: 192.168.2.8 > gateway IP: 192.168.2.8 > options: > subnet mask: 255.255.255.0 > IP broadcast: 192.168.2.255 > gateway: 192.168.2.8 > > > -- > Before posting, please read the FAQ: > http://ecos.sourceware.org/fom/ecos > and search the list archive: > http://ecos.sourceware.org/ml/ecos-discuss > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
