On Wed, Nov 02, 2005 at 03:47:31PM -0500, Morris Walton wrote:
> Thanks,
>
> It appears to be installed in the right place:
>
> /opt/ecos/gnutools/powerpc-eabi/lib/gcc-lib/powerpc-eabi/3.2.1/cpp0
>
> here is my g++ -v output (is this right?):
>
> [EMAIL PROTECTED] powerpc-eabi-g++ -v
> Reading specs from
> /opt/ecos/gnutools/powerpc-eabi/bin/../lib/gcc-lib/powerpc-eabi/3.2.1/specs
> Configured with:
> /home/demonweb/tools/ecos-gnutools-v1.4/r2/powerpc-eabi/x86_linux_lsb1_3/tar_bz2/source/gcc-3.2.1/configure
>
> --target=powerpc-eabi
> --prefix=/home/demonweb/tools/ecos-gnutools-v1.4/r2/powerpc-eabi/x86_linux_lsb1_3/tar_bz2/opt/ecos/gnutools/powerpc-eabi
>
This is your problem. Like i said, the location the toolchain lives is
hardcoded into the binary. In this case, the hard coded value is:
/home/demonweb/tools/ecos-gnutools-v1.4/r2/powerpc-eabi/x86_linux_lsb1_3/tar_bz2/opt/ecos/gnutools/powerpc-eabi
If you move the toolchain to there, i expect it will work.
But this is probably not what you wanted. When you built the toolchain
it looks like you got the --prefix option to configure wrong. I
suggest you try configure and build the toolchain again with
--prefix=/opt/ecos/gnutools/powerpc-eabi
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
