----- Original Message -----
From: "Andrew Lunn" <[EMAIL PROTECTED]>
To: "Michele Da Meda" <[EMAIL PROTECTED]>
Cc: "ecos-discuss" <[email protected]>
Sent: Thursday, December 01, 2005 12:28 PM
Subject: Re: [ECOS] Socket UDP
> On Thu, Dec 01, 2005 at 11:02:47AM +0100, Michele Da Meda wrote:
> > Hi all,
> >
> > my application uses UDP socket, i have a problem with SOCK_DGRAM and
> > SOCK_STREAM.
> > I make a BIND with these paramethers :
> >
> > sin_family = AF_INET
> > sin_addr = inet_addr("192.168.0.253")
> > sin_port = (unsigned short)htons(1900)
> >
> > with a socket like this : socket(AF_INET, SOCK_DGRAM, 0);
> >
> > I read that UDP socket not work properly, and is better use
"socketcall" ,
> > but i don't know how.
>
> The eCos TCP/IP stack does work. Sockets work as normal.
>
> Where have you read that they don't?
>
> socketcall().... Are you using the linux synthetic target?
>
> Andrew
No, i'm not.
Well, do you know why i receive always a RST packet after a SYN, instead
receive an ACK ?
I' ve created a socket : sock = socket(AF_INET, SOCK_STREAM, 0) , this
has been set in readset and i have been call the Listen function :
Listen(sock,4);
My SELECT return always 0 .
192.168.0.87 : browser in my intranet
192.168.0.253 : NEC MIPS where run my ecos application
>From 192.168.0.87 i make this call from browser :
http://192.168.0.253:57005
Packet SNIFFING :
Source Destination
192.168.0.87 192.168.0.253 TCP 4134 > 57005 [SYN]
Seq=0 Ack=0 Win=64240 Len=0 MSS=1460
192.168.0.253 192.168.0.87 TCP 57005 > 4134 [RST,ACK]
Seq=0 Ack=0 Win=1024 Len=0
Michele
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
