Hi
Lawrence wrote:
> Hi,
>
> I'm a newbie at embedded systems and my current aim is
> to port eCos onto AT91RM9200-EK.
Please note that eCosCentric have already ported eCos to the
AT91RM9200-EK and both RedBoot and eCos (and all the tests) run
out-of-the-box.
In fact it was on show at Embedded World in Nurnberg Germany last week
running a httpd+Jungo USB host demo as well as a second board running a
Swell C/PEG demo, and probably will be on show at ESC SV in April.
-- Alex
Visit us at ESC Silicon Valley, April 4-6 2006, Booth 1448
San Jose McEnery Convention Center http://www.embedded.com/esc/sv
>
> I've looked through the previous posts and obtained
> John's code for the board.
> Copied the folders to the appropriate places in the
> repository and applied the patches.
> And I built the RedBoot ROM startup image.
>
> I downloaded the Redboot image into the RAM and copied
> it into flash, all these done through the u-boot
> loader that was residing originally in the flash. But
> when I reboot the board, there wasnt any output.
>
> So, 2 possibilities:
> - something wrong with the codes
> (which is not likely becos according to him, it was
> functional)
> - something I did was wrong or I didn't do.
>
> Any help is deeply appreciated.
>
> Thanks & Regards,
> Law
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
