On Thu, Jun 08, 2006 at 02:28:00PM +0200, Socrates Socrates wrote: > On the target there's no output either. I can give you the steps that > I perform if you require. > > On 6/7/06, Andrew Lunn <[EMAIL PROTECTED]> wrote: > >On Wed, Jun 07, 2006 at 01:47:04PM +0200, Socrates Socrates wrote: > >> Correct that's what I needed. Now problem is the tests work; it just > >> hangs (or does nothing as seen from the last ine below), I followed > >> the example from the website you sent. > >> > >> Here are my steps using the simulator: (The results are the same even > >> when I connect to the board) > >> > >> ~/work/atmel/060606$ rm -rf * > >> [EMAIL PROTECTED]:~/work/atmel/060606$ ecosconfig new eb40 > >> [EMAIL PROTECTED]:~/work/atmel/060606$ ecosconfig tree > >> [EMAIL PROTECTED]:~/work/atmel/060606$ make -s > >> headers finished > >> build finished > >> [EMAIL PROTECTED]:~/work/atmel/060606$ make -s tests > >> headers finished > >> build finished > >> tests finished > >> [EMAIL PROTECTED]:~/work/atmel/060606$ arm-elf-gdb -nw > >> install/tests/kernel/v2_0/tests/bin_sem0 > >> GNU gdb 5.3 (eCosCentric) > >> Copyright 2002 Free Software Foundation, Inc. > >> GDB is free software, covered by the GNU General Public License, and you > >are > >> welcome to change it and/or distribute copies of it under certain > >> conditions. > >> Type "show copying" to see the conditions. > >> There is absolutely no warranty for GDB. Type "show warranty" for > >details. > >> This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-elf"... > >> (gdb) target bin > >> Undefined target command: "bin". Try "help target". > >> (gdb) target sim > >> Connected to the simulator. > >> (gdb) load > >> Loading section .rom_vectors, size 0x40 vma 0x2020000 > >> Loading section .text, size 0x6764 vma 0x2020040 > >> Loading section .rodata, size 0x394 vma 0x20267a4 > >> Loading section .data, size 0x2b4 vma 0x2026b38 > >> Start address 0x2020040 > >> Transfer rate: 225120 bits in <1 sec. > >> (gdb) continue > >> Continuing. > > > >The arm simulator does not include a simulated serial port, so you > >won't see anything. > > > >What happens on the real target which will have a serial port? > > > > Andrew
Please don't top post. http://www.catb.org/~esr/jargon/html/T/top-post.html The eb55 has two serial ports i think? Does it output out the other? Andrew -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
