Hi Joe,
Taking Andrew's suggestion I rolled my own. Would you like to see a copy?
...Laurie:{)
-----Original Message-----
From: Joe Porthouse [mailto:[EMAIL PROTECTED]
Sent: Saturday, 29 July 2006 7:30 AM
To: [email protected]; 'Laurie Gellatly'
Subject: RE: [ECOS] Dynamic IP/DHCP/Routing the 'right way'
Laurie,
Did you find a solution that worked? I'm also dealing with this same issue.
Thanks,
Joe Porthouse
Toptech Systems, Inc.
Longwood, FL 32750
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andrew Lunn
Sent: Tuesday, June 06, 2006 7:19 AM
To: Laurie Gellatly
Cc: [email protected]
Subject: Re: [ECOS] Dynamic IP/DHCP/Routing the 'right way'
On Tue, Jun 06, 2006 at 09:09:29PM +1000, Laurie Gellatly wrote:
> Hi Andrew,
> Thanks for the swift response.
> SNTP - yes. Thanks for the tips there and with DNS, I'll look at those.
>
> init_net() was not sufficient. It left the old addresses active. I've
> combined StackInit and IP_SetIP, IP_SetMask to remove the old address
> and mask. Still think the routing is not being updated, but before I
> launched into debugging all that I wanted to ensure I wasn't
> re-inventing the wheel.
I think this is a new wheel, at least i've not seen a public available
wheel which does this.
cyg_route_reinit() might help with your routing problem.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
