Hello everyone! I have a few questions about the porting of redboot. I'm working with an xscale custom board, derived (with very small differences) from the ixdp465 of intel. I'm using RedBoot just like a bootloader for a SnapGear Linux Operating system.
I'm following both the redboot porting guide and the intel howto about customiziong redboot. It seems that i've succesfully ported the "base HAL", so the new redboot works, the memory is read correctly. Now i've to add the support for an Analog Device Coder, embedded on my board. My questions are: 1) The init of this device must be done by redboot or i can let the "high level" OS to do this? 2) if i want to add the support for this AD component, what steps are required? It's enough to add a package with sources, .cdl and include files? or i have to modify some platform layout files? thanks in adv! claudio Chiacchiera con i tuoi amici in tempo reale! http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
