Hi Wolfgang, Thanks for your reply.
The link you attached below does not seem to be working. Is there another way to the port? Also, I would be very interested in the newer version as well from John. John could I gain access to this newer version as well? Thanks for your support and support from the eCos-discuss board. -Ray -----Original Message----- From: Wolfgang Köbler [mailto:[EMAIL PROTECTED] Sent: Thursday, October 05, 2006 1:31 AM To: Ray Duran Cc: [email protected]; John Eigelaar Subject: Re: [ECOS] AT91RM9200 port for Kwikbyte 9202 board Hi, On 04-Oct-2006 Ray Duran wrote: > I searched the archives and see the question asked, Is there an open > source port of eCos to the Kwikbyte 9202 board? There is probably no port for the Kwikbyte 9202 board, but there is a AT91RM9200-DK port. This port was already used (with small changes) on a lom-arm9 board. (In general the at91rm9200 boards seem to be quite similar. Of course they differ in available peripherals.) An old version of that port is available from http://asky.homeip.net/COREBlog/186 The current version, which is an improved version of the above, is available via CVS from John Eigelaar <[EMAIL PROTECTED]>. Ask him for access instructions. I successfully used the old version (redboot only). Since recently I am back on this subject. However, the at91rm9200 port may still need some work before it fits your application. This depends on the requirements of your application and the kwikbyte board details. Bye, Wolfgang -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
