Hi all I am trying to use ecos on VMWare to start developement of a networked applikation because my real hardware ist still under construction. I build redboot and eCos for VMWare with the latest Source- Snapshot with i386-elf-gcc Version 3.4.3 and i386-elf-gdb 6.5.0. under cygwin; I configured redboot and eCos both to use static IP- Adresses (two different ones) and not to use BOOTP or DHCP.
When i build the eCos with the template "default" and try to debug the twothreads example, everything works fine: - can load the application - start the debugger - start and stop the target by pressing CTRL_C - single stepping - quit the debugging session When i build eCos with the template "net" ( network support) , i can load and start the application and the applictaion runs fine. If the Application reaches a Brekpoint, the Debugger stops fine, and i can resume the target. But wenn i try to interrupt the running application (startet without any breakpoint) by pressing CTRL_C, the debugger can not stop the target. Am i missing somehing? Do i need special configuration for redboot or ecos? Thanks in advance. Klaus -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
