Hi All, when i run the twothreads.c example prg it hangs after displaying Entering twothreads' cyg_user_start() function Beginning execution; thread data is 0 Beginning execution; thread data is 1 My target board is based on ARM926ej-s Processor. Board clock speed is 6 MHz & i use Timer 1 clocked with 3 MHz. I placed a diag_printf() in RTC isr in clock.cxx. This prints properly. But i see that code does not come out of cyg_thread_delay(). If i replace the cyg_thread_delay() with a for() it works fine. Also could u guide me to set CYGNUM_HAL_RTC_PERIOD, CYGNUM_HAL_RTC_NUMERATOR & CYGNUM_HAL_RTC_DENOMINATOR. The timer is the same as used in Integrator/CP. Regards Gururaja
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
