Did you erase the flash blocks you try to use as JFFS2? You need to do so, otherwise the mount will fail.
-Hans 2006/11/3, himanshup <[EMAIL PROTECTED]>:
Hi, We are trying to use JFFS2 on PXA250 Evaluation Board. I am trying to run test program fileio1.c. However it is giving error in the mount() command itself. Below is the output: go 0x20000 [cyg_net_init] Init: mbinit(0x00000000) [cyg_net_init] Init: cyg_net_init_devs(0x00000000) Init device 'lan91cxx_eth0' [cyg_net_init] Init: loopattach(0x00000000) [cyg_net_init] Init: ifinit(0x00000000) IFP: 0x0007d304, next: 0x000ca320 IFP: 0x000ca320, next: 0x00000000 [cyg_net_init] Init: domaininit(0x00000000) [cyg_net_init] Init: cyg_net_add_domain(0x0007df0c) New domain internet at 0x00000000 [cyg_net_init] Init: cyg_net_add_domain(0x0007d66c) New domain route at 0x00000000 [cyg_net_init] Init: cyg_route_init(0x00000000) [cyg_net_init] Done <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x2003 instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x000c instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0xdc6d instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x2003 instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x000c instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0xdc6d instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x2003 instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x000c instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0xdc6d instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x2003 instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x000c instead <5>jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0xdc6d instead <5>Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes <5>empty_blocks 0, bad_blocks 0, c->nr_blocks 4 <FAIL>: mount() returned -1 I/O error <FAIL>: chdir() returned -1 No such entity Is there any prerequisite for running JFFS2 tests? What could be the problem? Regards, Himanshu Patel -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
