Dear Andrew Lunn,
Thanks for your guidance. But I know that I have to add package for
generic SPI. But when I am trying to add package from windows based
configuration tool through build ----> packages and trying to add generic
SPI package it is prompting that " Add and Remove hardware packages by
selecting a new hardware template ".
And another way is through Tools---->Administration. When I am going
to Add generic SPI package it is asking for .epk file to be opened. I
searched in my local drives that there is no such extension file is
available.
So, how can I add this package to my configuration. I think this is
the same problem for Ethernet also.
Regards,
Chirag Shah.
-----Original Message-----
From: Andrew Lunn [mailto:[EMAIL PROTECTED]
Sent: Monday, February 26, 2007 7:22 PM
To: Chirag shah
Cc: [EMAIL PROTECTED]
Subject: Re: [ECOS] SPI support for AT91SAM7XEK.
On Mon, Feb 26, 2007 at 03:17:09PM +0530, Chirag shah wrote:
> Dear All,
> I have successfully accessed uart0 of my SAM7XEK board which was my
> previous question on this mailing list.
>
> I have enabled UART0 port in
> IO_sub-system
> ----->serial_device_drivers-->Hardware_serial_devide_drivers----->port0
> through ecos configuration tool.
> After that I have use /dev/ser0 in cyg_io_lookup().
>
> Now I want to enable my SPI bus in SAM7XEK board.
> In ecos package directory structure it is already implemented for SAM7,
but
> in configuration tool SPI driver package CYGPKG_DEVS_SPI_ARM_AT91 can not
> get enabled. It can not be accessed as check Box like serial driver
drivers.
> So, how I could get SPI header files in cyg/IO/spi_at91.h
Add the generic SPI package to your configuration.
Andrew
-------------------------------------------------------
Masibus Process Instruments (P) Ltd, Gandhinagar, India
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
