I succeed redboot image loading into Avila board. Thanks to David Acker
for his time and patience.
I find npe Ethernet drivers are missing on the image. May I know how can
I add the drivers to the image?
Also the redboot shows the following errors -
1. Flash configuration checksum error
2. Not able to load from CF.
Setup -
Avila Board
IXDP425
Debian Linux 2.6.18
ECOS snapshot (1 week old)
How can I make redboot complete?
Thanks and rgds,
Bhanu Prakash A
REDBOOT LOG MESSAGES
---------------------
reset
... Resetting.
+**Warning** FLASH configuration checksum error or invalid key
Use 'fconfig -i' to [re]initialize database
No network interfaces found
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 02:13:17, Mar 2 2007
Platform: IXDP425 Development Platform (XScale) BE
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
RAM: 0x00000000-0x10000000, [0x00017440-0x0ffd1000] available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
RedBoot>
RedBoot>
RedBoot> fconfig
Run script at boot: false
Use BOOTP for network configuration: true
Default server IP address: 192.168.157.198
Console baud rate: 115200
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Update RedBoot non-volatile configuration - continue (y/n)? n
RedBoot> fconfig
Run script at boot: false
Use BOOTP for network configuration: true
Default server IP address: 192.168.157.198_ __ __ __ __ __ __ __ __ __
__ __ __ __ __ _
Console baud rate: 115200
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
RedBoot> load hda1:/images/minifs -r -b 0x000800000_ __ __ __ __ __ __
__ _800000 -m disk
Invalid 'mode': disk. Valid modes are: http tftp xmodem ymodem
RedBoot> ip_address _ __ __ __ __ __ __ __ __ __ __ _
RedBoot>
RedBoot>
The information contained in, or attached to, this e-mail, contains
confidential information and is intended solely for the use of the individual
or entity to whom they are addressed and is subject to legal privilege. If you
have received this e-mail in error you should notify the sender immediately by
reply e-mail, delete the message from your system and notify your system
manager. Please do not copy it for any purpose, or disclose its contents to any
other person. The views or opinions presented in this e-mail are solely those
of the author and do not necessarily represent those of the company. The
recipient should check this e-mail and any attachments for the presence of
viruses. The company accepts no liability for any damage caused, directly or
indirectly, by any virus transmitted in this email.
www.aztecsoft.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
