> -----Original Message----- > From: Gary Thomas [mailto:[EMAIL PROTECTED] > Sent: Thursday, May 03, 2007 2:07 PM > To: Jacob Avraham > Cc: [email protected] > Subject: Re: [ECOS] standalone Redboot configuration > > Jacob Avraham wrote: > > Hi, > > > > I'd like to run a standalone configuration of Redboot out of RAM, using > > a BDI debugger > > to download it to memory. I tried redboot_RAM, but after some > > instructions it trapped > > into debug mode. > > Is redboot_RAM capable of running standalone, or does it rely on > > pre-existing setup > > That perhaps redboot_ROM is doing? > > How should I configure redboot to run standalone out of RAM? > > What's the platform? Most targets can run RedBoot from RAM, > but some (in particular most ARM targets) cannot without some > massaging. > The target is IXDP425
> -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
