All - I'm booting eCos with RedBoot and sometimes I need to abort the boot script. This works fine with the serial console (^C during the delay interval), but I also need to take control by telnet when serial comm is not available.
If I issue 'channel -1' at the RedBoot prompt I can then open a telnet session, but upon reboot the hardware channel setting is back to '0' (serial) and I can't take control directly by telnet. How can I configure the "first client gets the console" behavior from hard reset? (I can reconfigure and rebuild RedBoot if necessary, but it would be easier if there is just a persistent 'fconfig' setting I could use.) Hardware is MIPS / AP30. TIA. - John Mills [EMAIL PROTECTED] -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
