cetoni GmbH - Uwe Kindler пишет:
Hello Alexey,
which serial channel do you use for the serial connection? I also have a
LPC-E2294 board (Rev. B) here. Do you use the onboard USB connector or
the onboard RS232 D-Sub connector for serial conection?
Best regards
Uwe
Hello Uwe,
I use USB connector. Do you test Sergei's port? You can find it on his
home page (http://sgs.gomel.by/sg/articles/olpce2294/index.html).
However, I clear up some of features.
It's not a problem of /dev/ttydiag. I don't understand why, but then I
use the serial connection instead of the ethernet my thread doesn't
start (it doesn't perform other work). cyg_user_start() works properly
and its output appear on the serial port.
Additionally I found that then Hardware serial device drivers is enabled
thread starts and works fine. It's strange because /dev/haldiag uses a
RedBoot comm channels.
I found that the thread doesn't start because Cyg_RealTimeClock::dsr
never be called after Cyg_RealTimeClock::isr. At this moment I know only
that Cyg_Scheduler::unlock_inner (it calls dsr eventually) never starts.
I'm newbie in ecos and a process moves slowly.
Best regards
Alexey Shusharin
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
