Hi, when I try the command: ecosconfig new pc_rltk8139 under the Cygwin I got this complain: "fatal error - called with threadlist_ix -1"
Would you like to tell me what caused this problem and how I can solve it? Thank you in advance! On 6/14/07, Andrew Lunn <[EMAIL PROTECTED]> wrote:
On Thu, Jun 14, 2007 at 05:14:18PM +0200, xiaolu zhao wrote: > Hi, I met a big problem, would you like to give me some advices? > > I did some modifications to the ecos Kernel code(like in sched.cxx, > thread.hxx etc.). But I have no a real hardware board. So I want to > use VMware as a virtual machine to see the results.Is it possible? Should be, but i have never done it myself. However, i would actually recommend using the synthetic target on Linux. > I tried the redbbot on the Vmware and the "hello.c" example works. But > after I modified the kernel code and rebuild the ecos using the > configtool, it did not give any compilation complaints. I know it is > impossible, there should be a lot of errors in the code. Does Redbbot > have nothing to do with the ecos kernel files? Redboot does not use the kernel. > If the redboot has nothing to do with the kernels, how can I check my > modificaiton to the kernel files with VMare? I would suggest you use the kernel test cases. These are good tests to see if your changes have broken anything. Try doing: ecosconfig new pc_rltk8139 edit ecos.ecc and change CYG_HAL_STARTUP to floppy ecosconfig tree make -s tests Once you have fixed all the compiler error you can run the test cases in install/tests/kernel/current. Andrew
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
