eCos is ported to some automotive platforms such as Freescale's MPC500 and MAC7100. Here you will find info of some supported hardware.
Best regards Ilija Klaus Nji wrote: > Any additional piece of information will be of help. > > I am currently looking for an Evaluation board for an automotive application. > > I have looked at the list currently listed on eCosCentric but could use some > additional advice or recommendations based on recent experiences. I want to > minimize running into technical difficulties arising from incompatibility > issues given my limited resources. > > As of now, hardware requirements are: > > • 32 or 64 bit CPU (CPU speed not crucial as time fastest dynamic is 1s). > • Low Power Consumption or Sleep Mode capability > • Expandable Flash Memory for field upgrade of firmware > • 3x RS-232 > • CAN interface > • 1 Audio/Video > • 1 USB 2.0 port (not mandatory) > • Couple of analog and digital I/O > • eCos recently ported onto board with minimal technical difficulties. > > Again, any advice from recent experiences will be greatly appreciated. > > Thanks in advance, > > > Klaus > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
