Hello Yasser, Please continue posting to the list so that everybody can benefit when I say, "Sorry, I can't help you." :-) Or, perhaps, K-C Lee will see your post and offer some suggestions.
On 7/18/07, yasser Nour El-Din <[EMAIL PROTECTED]> wrote:
hello patrik, I have succeeded to put redboot in flash using the flash utility program, the problem that i didn't enable diag TTY serial device on the configuration.
Great!
No i want to enable ethernet on redBoot, i read your message: http://sourceware.org/ml/ecos-discuss/2006-02/msg00300.html and make sure that this line in hal_mmu_init() exists. And i add the next packages: package -hardware CYGPKG_DEVS_ETH_SMSC_LAN91CXX current ; package -hardware CYGPKG_DEVS_ETH_ARM_OSK5912 current ; package CYGPKG_IO_ETH_DRIVERS current ; The CYGPKG_DEVS_ETH_ARM_OSK5912 package is the folder of innovator ethernet package but move it to devs/eth/arm/osk5912 i changed each innovator to OSK5912 in cdl and inl files. Also i changed the base address in inl file to 0x04800000. But when i try it, it give me "No network interfaces found" in redboot startup message. I attached the devs_eth_osk5912.inl Thanks for you help Yasser Nour
I never tried to get the ethernet working on the OSK, so I'm afraid I can't help much here. Perhaps the somebody else on the list has gotten it working. In lieu of that, I would suggest the judicious application of calls to diag_print(), to see if the initialization code for the ethernet driver is even being called, and, if it is, what it is not finding to its liking. --wpd -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
