On Fri, Sep 14, 2007 at 05:04:17PM -0400, Scott Moore wrote: > Hi, sorry to post on this yet again, but I built both > the p2106 and lpcmt targets, and both appear to have the > same (forgive me) braindamaged I/O as the mcb2100 board > target. I tried: > > C:\projects\testbuild>ecosconfig add CYGPKG_IO_SERIAL_GENERIC_16X5X > Package `CYGPKG_IO_SERIAL_GENERIC_16X5X' is already loaded. > > And the configurator appears to believe that this is already selected. > However, after building, I don't see the ser_16x5x.o file anywhere > in the build. ser_16x5x.c is the file > ../ecos/packages/devs/serial/generic/16x5x/current/src/ser_16x5x which > contains the 16x5x general support. Instead it is including: > > 09/14/2007 01:47 PM 23,264 io_serial_haldiag.o > 09/14/2007 01:47 PM 26,808 io_serial_serial.o > 09/14/2007 01:47 PM 21,488 io_serial_tty.o > > haldiag is the package that includes the stripped down, polling > mode only I/O. > > What's the trick to getting this package (really) included in the > build?
Do you have CYGPKG_IO_SERIAL_DEVICES enabled? That catches a lot of people out. Andrew -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
