Thanks,
It looks reasonable, I'll give it a try.
Will.
Andrew Lunn wrote:
On Tue, Oct 09, 2007 at 12:25:42PM +0100, Will Wagner wrote:
Hi All,
I'm using the bsd sockets code and I have more than one interface. I am
seeing that when one interface has to reget an address via dhcp then I get
problems using the other interface.
Looking through the code it appears there might me a problem with the
routing table. The dhcp code calls cyg_route_reinit() in a couple of places
- do_dhcp_down_net() and bring_half_up() which are called whilst obtaining
an address. The cyg_route_reinit() function seems to just empty the routing
table regardless of interface.
Could this be my problem or am I looking in the wrong place? Anyone got any
code for removing all routes for a specific interface only?
There is a patch for that somewhere in ecos-patches, probably in the
last year. Although it looked O.K. i was not convinced it would work
in all situations. Why did the original author of the DHCP client not
do something similar?. I don't have a dual interface device so i
cannot test. So i would be interested in your comments about the
patch.
Andrew
--
------------------------------------------------------------------------
Will Wagner [EMAIL PROTECTED]
Senior Project Engineer Office Tel: +44 (0)20 7371 2032
Carallon Ltd, Studio G20, Shepherds Building, Rockley Rd, London W14 0DA
------------------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
