Hi Andrew, The USB 1.1 interface on ADI board is built around the on-chip USB controller and can work only as the USB peripheral at 12 Mbps data rate.
Is the driver already available for the in build USB of IXP425? Regards, Navya -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Lunn Sent: Saturday, November 17, 2007 12:47 PM To: Navya S Kamath Cc: ecos-discuss@ecos.sourceware.org Subject: Re: [ECOS] How to enable USB on IXP425 GRG On Sat, Nov 17, 2007 at 12:36:35PM +0530, Navya S Kamath wrote: > Hi, > > I am using ADI Coyote Residential Gateway Reference Design based on Intel > IXP425 network processor. I would like to enable the USB device on the > board. How can I do this? > > Currently when I connect the USB on the board with a windows XP based PC > Windows says that "USB device attached has malfunctioned and windows does > not recognize it". > > How can I get the USB up and windows recognize it? Please help. You need to start by writing a USB device driver for that chip. See the eCos USB documentation. Andrew -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
