Thanks for your help but unfortunately we do not have the source code for this Redboot so I deduce that we should start from the beginning. Which source could we use from the list?
2007/12/20, Gary Thomas <[EMAIL PROTECTED]>: > Xavier Martinez wrote: > > Hi, > > > > We are trying to flash a "Meraki Outdoor" router with the openwrt > > kamikaze 7.09 firmware via Redboot. Unfortunately, the unit reboots > > after a few minutes of entering the redboot and we are not able to > > finish writing the linux and rootfs partitions. It seems like the > > redboot of this unit (unreleased version 1.3) has some kind of bug and > > we would like to load a newer version of the redboot. The board is > > identified as AP61 and we suspect that its athero chipset is based on > > MIPS 4kc architecture. We would like to gain ethernet and serial > > access in order to flash the firmware. > > > > However we haven't tried to update the redboot before and we wouldn't > > like to end with a plastic brick in our hands. We would be very > > pleased if someone could give advice on how to update the redboot on > > this unit. > > This device is not in the public CVS, so help on this list > may be quite limited. > > I would expect that you could build a RAM startup version > of RedBoot, load that and then work from there. If this > works, you should be able to verify the proper operation > of the unit & RedBoot before committing any new ROM code. > > I presume that you have the sources for the RedBoot in question? > > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
