Sorry for late reply.
Yes, when I specify appropriate deviceType in serial-channel-instance, the
driver code will not check chip and just enable it.
So I explictly set deviceType for LPC2XXX's UART0, and intialize UART1 and
other channels(of SC16C550) as before, then all channels works well with FIFO
enabled.
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Sun, 27 Jan 2008 07:40:53 +1100
> Subject: RE: [ECOS] Re: Half Duplex RS485
>
> Hi Wang,
> I've been looking through the patch you sent.
> I don't see any change to the FIFO handling unless you mean where
> it figures out the deviceType?
>
> ...Laurie:{)
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
_________________________________________________________________
手机也能上 MSN 聊天了，快来试试吧！
http://mobile.msn.com.cn/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
