Hi, The eCos Flash v2 code is in a separate repository. It's probably best to start from the latest of the trunk from ecos.sourceware.org
You just have to replace the following directories with the ones from the flash v2 branch: io/flash dev/flash redboot fs/jffs2 Using the flash v2 branch will make it possible to use 2 flashes. Tom On Feb 4, 2008 1:51 PM, Antonello Lombardinilo <[EMAIL PROTECTED]> wrote: > Hi all, > > I developed board based on Intel IXP435 Multi-Service > Residential Gateway Reference Platform (KIXRP435). > > Main difference is that my board have a 2 flash chip: > a 512 Kbytes boot flash and 16 Mbytes NAND flash. > > I succesfully ported Redboot v.2.04 with boot flash and > npe support on my board. > Now I would also manage NAND flash with FIS. > I readed about eCos/Redboot Flash V2 API, but I'am > confused because the Redboot src that I use are from > RedHat ftp source and not from ecos repository. > > Can someone suggest me how go ahead ? > > Antonello > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
