Hi, Gary, Gary Thomas <[EMAIL PROTECTED]> wrote:
> Alternatively, you could go with the current (flash_v1) setup which > does support NAND devices (somewhat - it's not 100% pretty). RedBoot > and FIS can be run in this mode, just not JFFS2. Ah, that's sad. But as there's no other writable file system which runs on NAND flash, I don't have any other choice, right? > Look at the TAMS MOAB port for an example. Thanks for the pointer. > What NAND device(s) are you thinking about using? > What's the target architecture? It is the builtin NAND controller in a Centrality (now SIRF) Atlas II / Atlas III CPU (an Arm9 derivate), on our own board. We already have running eCos on it, including RedBoot, and most other drivers we need. Regards, Markus -- Markus Schaber | Logical Tracking&Tracing International AG Dipl. Inf. | Software Development GIS Fight against software patents in Europe! www.ffii.org www.nosoftwarepatents.org -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
