Hi Gary, After redboot boots thriugh nor, i think we can change the boot to nand and restart/boot through nand. rit? Could u please forward me the archives where these were discussed? I tried searching but cud'nt find any.
Thanks, TJ On Thu, Jul 24, 2008 at 10:41 PM, Gary Thomas <[EMAIL PROTECTED]> wrote: > Tiju Jacob wrote: >> >> It is a mx27 ADS based board. The redboot/eCos sources were given by >> Freescale. > > Please keep replies on the eCos list so that all may benefit. > > AFAIK, that port only supports the NOR FLASH on the board. If you want > to add NAND, you'll need to write the drivers, etc, yourself. There > has been much discussion on this topic of late; check the archives. > >> On Thu, Jul 24, 2008 at 8:56 PM, Gary Thomas <[EMAIL PROTECTED]> wrote: >>> >>> Tiju Jacob wrote: >>>> >>>> Hi all, >>>> >>>> I have a freescale based development board. I am trying to boot from >>>> nand using redboot. My queries are: >>>> >>>> 1. How would I enable the nand flash in redboot? >>>> 2. How to integrate jffs2 filesystem with redboot? >>>> 3. If integrated will I be able to write, read, erase files in the nand >>>> flash? >>>> 4. How could I enable the support for these functionalities? >>>> >>> What kind of Freescale development board is it? >>> Where did you get the RedBoot/eCos sources (if not from the public CVS >>> tree)? > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
