Øyvind Harboe writes: > Sergei Gavrikov wrote: > > Øyvind Harboe wrote: > >> I've been toying around with building GCC toolchains(as one does...). > >> > >> They are ready for testing if anyone is interested: > >> > >> http://mail.zylin.com/pipermail/zylin-discuss_zylin.com/2008-September/000557.html > >> > >> Feedback welcome! > > > > Øyvind, thank you for your contribution. Before to start download I read > > a point on the http://www.zylin.com/gccbinary.html page: > > > > The binaries contain the authoritative source of what build options > > that were used. > > Yes. Run gcc -v.
It's wondeful to know about dumping GCC build options and it's specs after downloading XXL archive :-) I have 128/32K connection. And what's about binutils, newlib, gdb? Did you configure that using the prefix and the target/host/build triplet only? I guessed you didn't. > You can download them from the GCC mirrors, why would you want > them from Zylin? > > Don't you know where the GCC mirrors are? Yes, I do. More that I have the copies of the referenced packages on my disk and therefore I asked you about your steps (guide ?) just in a text form, but no 7-zip :-) to replicate any build. I dislike RTBF and most like UTSL http://web.bilkent.edu.tr/Online/Jargon30/JARGON_R/RTFB.HTML http://web.bilkent.edu.tr/Online/Jargon30/JARGON_U/UTSL.HTML You asked about a feedback. And I guess that the testers would compare their build steps with your ones. In any case, thank you for your spent time, bogomips and disk storage to contribute the toolchains. http://www.zylin.com/gcc/binaries/linux/nocortex-arm-elf.tar.bz2 (try: 6) => `nocortex-arm-elf.tar.bz2' Connecting to 192.168.0.1:3128... connected. Proxy request sent, awaiting response... 206 Partial Content Length: 54,147,927 (52M), 44,574,970 (43M) remaining [application/x-tar] 19% [++++++> ] 10,440,434 --.--K/s ETA I wonder what I'll got then... GCC/newlib/binutils/gdb sources? Sergei -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
