Konrad Lionel wrote:
> Hello,
>
> I'm trying to upload a file using YMODEM from Redboot console running on the
> RAM in my ARM-based platform.
> I can launch the command (RedBoot>load -m ymodem -b %{FREEMEMLO}), but when I
> try to send the target file in minicom pressing Ctrl-A S, after several
> trials, the protocol does not arrive to upload the file and it remains
> blocked.
>
> Is there any command or parameter I need to set to activate the upload of
> files through YMODEM ?
No, it should "just work"
What happens on the console when you start the download (don't
break into minicom to start the actual process)? You should
see a series of 'C' characters, approximately 3 seconds apart.
This is RedBoot telling the download process to retry.
If that's working, then it may be a problem with what you are
downloading. What sort of file/data is it?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
